19"

Here is an illustration of the 19" Kibo. Please note that on the 19" Kibo, Kibo+ and Kibo Rohloff we can fit a couple of different stems depending on your preferred riding position. We tend to fit one with a low rise as it is a short headtube but we can also fit the Nitto riser stem if you prefer higher bars, but please note that it can't be fully lowered. So let us know when ordering a 19" what your preferred bar height and riding position is. Feel free to call or email us if you would like to discuss this.

 

For a height of 5' 2" we have estimated an inside leg measurement of 711cm (28") so the standover height is circa 3cm taller than your inside leg - so you may want to consider the ahead version of the 19" Kibo which has a sloping top tube giving a lower standover height, or we can discuss bespoke geometry of this frame based on your specific measurements with a sloping top tube or even a step through Kibo might be suitable.

It will be worthwhile measuring your inside leg measurement - if it's longer than 28" than it's likely the saddle will need to be higher than that shown in the image. To do this 1. Get a book and stand with your back against the wall, 2. Place the book in between your legs as high as it will go, 3. Move away from the wall keeping the book against the wall and finally, 4. measure from the top of the book to the floor. It will also be useful to measure the saddle height (bottom bracket centre to the top of the saddle) on your current bike and compare it against the illustrations.

If you would like a specific illustration showing your current saddle height (measured from bottom bracket to top of saddle) or based on your inside leg measurement, then click here to send us your measurements in mm and the frame size(s) you are interested in and we will create it and email it to you. 

Custom geometry - We can also customise the geometry to suit you. You can either visit us for a measure and fit, or by sending us some key measurements we can design your custom Kibo.