Pamira frame and fork

£1,350.00Price

The Pamira expedition frameset with 1 1/8" threadless steerer for an ahead stem. Clearance for 27.5 x 2.4" tyres or 700c x 2.2" tyres. Frame tubing - Reynolds 853/725 main triangle, 631 rear triangle, 853 fork blades. Rear dropouts from Paragon, fork crown from Crust Bikes

 

The price includes custom sizing of your frame to best fit you. You can either visit our showroom for a fitting (no extra cost) or send us your measurements. Click here to arrange a fitting or for info on how to take the measurements.

Headset
  • The frame and forks are hand built in the UK by one of the country’s top frame builders - Lee Cooper.

    The frame is fillet brazed using a combination of heat treated Reynolds 853 and 725 tubing for the main triangle, and 631 for the stays. The tubes are oversize with a 31.8mm top tube, 34.9 seat and down tube, and 44mm internal diameter head tube.

    The fork crown is by Crust Bikes in the US and the fork blades are Reynolds 853 specifically designed for disc brakes. 

    The frame is fillet brazed which means the the tubes are joined without using lugs or welding.  We use a brass brazing rod to create a small mound around the joint called the “fillet.” The fillet on the Pamira is left unfiled.

    ​The tube diameters and wall thicknesses ensure the frame is tough enough for loaded touring on rough roads.

    The rear sliding dropouts are from Paragon and we offer a choice of inserts - either with a derailleur hanger and ISO disc mounts and compatible with 10 x 135 mm quick release or for a Rohloff Speedhub, with ISO disc mounts and again compatible 10 x 135 O.L.D.

    The front dropouts are for 9 x 100 mm O.L.D. quick release hubs.

    The BB sleeve is English (British/BS) thread 73mm.

    The tyre clearances on the Pamira are the most generous out of all of our bikes, up to 27.5" x 2.4" and 700c x 2.2".

    There are a number of rack and bottle cage bosses - bosses for a rear pannier rack and braze-ons for front rack and carry-anything cages. There are four bottle cage mounts. There also mounts/eyelets for mudguards.

    The headbadge is hand made in the UK from pewter.

    The frame is finished with a double powder coat in our new Sand colour although you can choose from any of our stock colours or pay a bit extra for a custom colour.

    The price includes custom sizing of your frame to best fit you. You can either visit our showroom for a fitting (no extra cost) or send us your measurements. Click here to arrange a fitting or for info on how to take the measurements.

    N.B. not compatible with road transmissions due to narrow Q factor of the chainsets. Minimum upper ring of triple chainset is 44 teeth - front derailleur needs to be for 63-66° chainstay angle.

    N.B. the headset isn't included.